-
Size – 58mm x 80mm with a height of 93mm (Collapsible)
2.3x magnification
Made of silica gel
-
Stocks supplied by Authorized Distributor for Malaysia with 1 year warranty.
Parameter:
- Name: LENSGO Wireless Microphone Model: LWM-318C
- Net weight: TX 30g, RX 30g
- Dimensions: L67mm x H26mm x W30mm
- Material: ABS, Magnet, PCB
- Signal to Noise Ratio: 96Db
- Wireless Frequency Range: 560-590MHz
- RF Output Power: 8dbm
- Frequency response: 30-20KHz
- Charger Socket: Mini USB
- Battery time: 5 Hours
- Effective Distance: 50 meters (no obstacles)
- Signal Channel: 20
- Audio Output Socket: 3.5mm TRS
- Monitor Output Socket: 3.5mm TRS
- Total Harmonic Distortion: 0.03%
-
- Specifications:
*Brand: LENSGO
*Model: LYM-DM1
*Transducer: Electret condenser
*Polar Pattern: Omni-directional
*Signal/Noise: 58dB SPL
*Sensitivity: -34dB ±3dB / 0dB=1v/Pa, f=1kHz
*Output Impedance: 2200 Ohm or less
*Connector: 3.5mm (1/8″) 4-pole gold-plating audio connector
*Cable Length: 6 meters
*Battery Type: LR44
*Microphone Size: 18mm * 8.3mm * 8.3mm(H * W * D)
*Microphone Weight: 2.5g / 0.1oz
*Power Module Weight: 18g / 0.6oz
*Package Size: 15.5 * 9 * 3.5cm / 6.1 * 3.5 * 1.4inch
*Package Weight: 98g / 3.5oz
- Specifications:
-
- Multifunctional Desktop Tripod
- Weight: 0.156 kg
- Max Height: 23.5 cm
- Material: ABS + PC
- Max Load: 3 kg
-
- Multifunctional Desktop Tripod
- Weight: 0.156 kg
- Max Height: 23.5 cm
- Material: ABS + PC
- Max Load: 3 kg
-
- 3.0 memory card reader
- CF, SD & Micro SD cards.
- For storing your memory cards
- Made of high quality material
- water resistance and dust proof
- interface rate 5Gbps
-
The Manfrotto 410PL Quick Release Plate is a low profile plate for the RC4 quick release system. It is larger than Manfrotto’s standard RC2 system’s plate, and it comes supplied with both 1/4″ and 3/8″ threaded screws. Its screw travels along a 2″ grooved slot, to better accommodate professional cameras of different dimensions.
-
The Manfrotto 678 Universal Folding Base accessory allows the addition of a base made of three foldable high strength steel legs for monopods 679, 680, 681 and older style 3016, 3018, 3249. The legs can be folded and stored inside the bottom section of the monopod ready for use in just a few seconds.
Maximum Load Capacity: 30.8 lbs
Weight: .9 lbs -
*16MM diameter
*Manfrotto 055CXPRO4, 190XB, 190XDB, 190XPROB, 190CX3, 190CXPRO3, 190CXV3, and 055CXPRO4 tripods.
6% GST INCLUDED
-
• serves as a camera grip (wrist strap) which morphs into a compact and padded camera carrier.
• Compatible with almost all of today’s Mirrorless (CSC) cameras on the market, and a wide range of lenses.
• eliminates the need to carry bulky camera bag in addition to your personal bag.
• made from energy-absorbing Neoprene foam and soft Lycra fabric.
• Modular adapter system makes it suitable for most Mirrorless (CSC) cameras
• Multipurpose Nickel coated Steel screw serves as a secure connector to the camera and also allows connecting to a tripod while miggo is attached.
• Designated pocket for lens cap
• Adjustable cord for perfect fit to your wrist
• Carrying handle -
• serves as a camera grip (wrist strap) which morphs into a compact and padded camera carrier.
• Compatible with almost all of today’s Mirrorless (CSC) cameras on the market, and a wide range of lenses.
• eliminates the need to carry bulky camera bag in addition to your personal bag.
• made from energy-absorbing Neoprene foam and soft Lycra fabric.
• Modular adapter system makes it suitable for most Mirrorless (CSC) cameras
• Multipurpose Nickel coated Steel screw serves as a secure connector to the camera and also allows connecting to a tripod while miggo is attached.
• Designated pocket for lens cap
• Adjustable cord for perfect fit to your wrist
• Carrying handle -
• serves as a camera grip (wrist strap) which morphs into a compact and padded camera carrier.
• Compatible with almost all of today’s (DSLR) cameras on the market, and a wide range of lenses.
• eliminates the need to carry bulky camera bag in addition to your personal bag.
• made from energy-absorbing Neoprene foam and soft Lycra fabric.
• Modular adapter system makes it suitable for most (DSLR) cameras
• Multipurpose Nickel coated Steel screw serves as a secure connector to the camera and also allows connecting to a tripod while miggo is attached.
• Designated pocket for lens cap
• Adjustable cord for perfect fit to your wrist
• Carrying handle -
The ORIGINAL EN-EL3a is a rechargeable battery for use exclusively with Nikon digital cameras. It can be recharged repeatedly using an MH-18a or MH-18 Quick Charger or a MH-19 Multi Charger. 1500mAh.
-
The compact and slim lithium-ion rechargeable battery EN-EL8 designed exclusively for the dedicated COOLPIX cameras. Powers the camera for approx. 200 pictures per charge and can be recharged repeatedly using the compatible battery charger MH-62.
730mAh
Original
-
EN-EL9 Rechargeable Li-ion Battery can be recharged with the MH-23 Quick Charger.
These rechargeable batteries provide extended life and consistent power, even in colder conditions.
Used together With your Nikon D-SLR, the camera’s fuel gauge accurately displays the remaining charge and number of shots since the last charging of the EN-EL9 rechargeable Li-ion battery.1000mAh
Original
-
- for fast flash recharge
- longer flash shooting time
- easy to use
- carry case included
- compatable with Canon Flash: 600EX-RT, 580EXII, 580EX, 550EX, MR-14EX, MT-24EX
-
*High capacity of 950mAh, 7.4V
*Built-in microchip (decoded) allows the camera to read battery information
*Made from premium Japanese cells for maximum battery life
*Fully compatible with original equipment -
*FSK 2.4GHz wireless control system
*80 meters or above
*16 channels
*3 groups
*3.5mm sync sockets
*Shutter sync speeds up to 1/250 sec
*Metal hot- shoe